Repairs done lately:
- Trunk seal recycled from other car, fits almost perfectly
- Fuel hoses were leaking (poor quality hose had disintegrated), swapped
- Carburetor top end gaskets made and swapped, no leaks now
- Float chamber needle valve stuck (only the other, fortunately), gasoline everywhere, cleaned it and seems to hold now
- Other inlet plastic gasket swapped as the old literally crumbled away when I removed the carburetor, no wonder it had an intake leak causing very poor idle. Nice and solid idle now
- Attached wire back to the choke heater ... no wonder it was using a lot of gas: the other choke flap was never opening properly as heating element wasn't powered at all
Muutettu viimeksi/Updated 14.10.2019